So the operation we did here was again a simple two tension lower, and two tension raise, through two Petzl I’Ds, with the highlight of it being the high directional that we chose to use this time. And that’s the SMC Vector. So it’s a single gin pole, and it allows a lot of different …
Most people, at the end of each year, stand back and reflect on what was, what is and what should have been. An epoch season and epic events both apply to myself, our company and those around us. To date, we have produced somewhere between 600 and 700 technical rigging and rescue videos and has …
A few years ago, we had a very cool time and space with CMC Rescue (now simply… CMC). This project was a dream world of live training, film production and in-use product defining. Here is snapshot of what transpired. Mitigating “edge trauma”, as many call it… is likely the most arduous job of any rigger …
The Basics Of How The Arizona Vortex Works: Part 2 Read More »
Okay, so we’re just going to talk about the background on why we use the Vortex, so for this demonstration, we’ve taken the rope out of the pulley, the head of the Vortex. In this configuration, assuming that the Vortex is actually not even here, you can see that John is tied into the red …
The Basics Of How The Arizona Vortex Works: Part 1 Read More »
From Jason Ilowite… our instructor for this flagship course 5 Day Advance Workshop. So a little bit about the upcoming 5 Day Advance Workshop and why I think it’s important and valuable. I think the five day course addresses a problem that many of us, and I say us, I’m talking about fire service, rescue. …
The following excerpt is Mark Pfeifer of Ronin Rescue during an interview with Lance Piatt of Rigging Lab Academy. “So we reached out a year or so ago and started looking at confined space. There’s a lot of video on rope rescue, a lot of cool highline failure videos you can watch. There wasn’t a …
Two Rope Offset Systems or “cross hauling” uses two identical working systems (normally). Now while some use a main-belay system, we are advocating a “two tension system” as it “halves” the amount of tension on both sides respectively, thus reducing the chances of any load related challenges… I am purposely not using the term “catastrophic …
So in this installment of Litter Hauling Techniques Using Dual Capacity or Twin Tension Rope Systems Part 2, I would like to jump into anchor and anchor systems used in a few of the systems we set up here this week. Neverland has three upper platforms or stages (as we call them) and the lower Ground …
Litter Hauling Techniques Using Dual Capacity or Twin Tension Rope Systems Part 2 Read More »
Now we’re down at the bottom end. As I said at the top, we’ve got our red track line and we’ve got our blue skate block. The attachments here, we’ve got a pulley on the track line. Also on the track line we have a mobile fall arrester, a Petzl ASAP. That means worst case, …
Industrial Skate Block Trackline System Lower Section (Part 2) Read More »
Hi, I’m Richard Delaney from Rope Lab in the Blue Mountains of Australia, and I’m working today with the Rigging Lab Academy. Today we’re working at Deschutes Brewery in Bend, Oregon. We are working with the same type skate blocks that we’ve been looking at in previous sessions, but this time we’re working in an …
Industrial Skate Block Trackline System Upper Section (Part 1) Read More »
