The AZTEK Elite Pulley System Kit

Written By: Lance Piatt

AZTEK Elite Pulley System Kit Includes 1 ea. Rock Exotica Omni AZTEK Elite blue pulley 1 ea. Rock Exotica Omni AZTEK Elite system has become the ultimate Personal Mechanical Advantage kit that can be configured as a 5:1, or 4:1 mechanical advantage with a re-direct by just rotating the system. The AZTEK can be used as a pick off, adjustable directional, high directional guyline, high angle attendant tether, high angle litter scoop, load release hitch and much more. Each pulley is color coded to match with a corresponding prusik for quick identification. The AZTEK pulleys are machined from solid aluminum, feature swivel connection points, and utilize high efficiency bearings.

As most know, pulleys are simply wheels on axles designed to assist or direct movement of the rope along the grooved circumference of the wheel. One pulley alone can be utilized to lift loads and apply forces to transmit power, but incorporating multiple pulleys into a system decreases the amount of applied force required to transmit the power to move the load. A pulley, also known as a sheave or drum, most commonly has a groove on the wheel’s outside edge along the perimeter of the wheel between two flanges around the pulley’s circumference. The cord or rope is the drive element of the pulley or pulley system. When the rope in a pulley is pulled upon, the force applied to the rope compresses it against and into the V groove between the flanges of the pulley wheel creating sufficient friction to move the wheel, rotating the pulley wheel around its axle.

Multiple pulleys can be configured to form a block and tackle system for the purpose of providing a mechanical advantage to apply large forces in order to lift or move the heavy load more easily than with one pulley. Two pulleys together in a system form blocks. Blocks are arranged in such fashion that one moves with the load while the other is in a fixed position. The assembly of a set of two blocks with the rope threaded around the respective pulleys is called tackle. The rope threaded around the pulleys is referred to as reeving. The rope or cord that is reeved through the pulleys provides mechanical advantage. Mechanical advantage amplifies the force applied to the rope allowing for the moving or lifting of the load with less initial, original force. The end result is a system of pulleys that moves and lifts loads more easily while less force is applied when pulling upon the cord or rope.

As always… rig safely and once the foundations are understood… be creative!

Peace on your days…

Online Education and Membership

 

 

 

Get your Gear Here…. Become an RRG Pro today and save.

 

 

 

 

 

Categories
Facebook
Twitter
LinkedIn
Email

About The Author:

Related Posts

15 thoughts on “The AZTEK Elite Pulley System Kit”

  1. 336542 213743Spot lets start work on this write-up, I really believe this incredible site requirements additional consideration. Ill much more likely be once once again you just read additional, thank you that details. 672759

  2. Howdy just wanted to give you a quick heads up.

    The words in your content seem to be running off the screen in Ie.
    I’m not sure if this is a format issue or something to do with browser compatibility but
    I figured I’d post to let you know. The layout look great though!

    Hope you get the issue resolved soon. Thanks

  3. 110946 235266Can I merely say exactly what a relief to get someone who in fact knows what theyre dealing with on the internet. You truly know how to bring a difficulty to light and make it critical. The diet need to see this and fully grasp this side on the story. I cant believe youre not far more common because you undoubtedly hold the gift. 974100

Leave a Comment

Your email address will not be published.