Petzl Coeur Pulse Removable Anchor System

Written By: Lance Piatt

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on google
Google+
Share on email
Email

 

Petzl Coeur Pulse Removable Anchor System

 

Okay. So we’re here just this morning to talk about the Coeur Pulse removable anchor and its installation. There are a few things we need to be careful of in order to attain maximum pullout strength. Any poor installation could result in no pullout strength at all. So there are four steps we’re going to talk about.

Firstly is to select a solid parent material. The concrete that we have in this video is something that we use in our technical instructions. When we talk about that, it’s a 50 megapascal concrete.

The second thing we’re going to look at is the type of drill bit that we need to use. You can see I’ve got three in my hand. We’ve got a few options. But it’s really important that we use a drill bit with cutting edges, which are either three or four points on the head. Herewith our two cutting edges, we know that we’re not going to get a completely round hole and the Coeur Pulse needs a completely round hole. We can put that one to the side.

I’ve got two left here that I’m looking at, and they’re both very close, very similar. We’ve got our four cutting edges. One of them, however, is a half-inch drill bit. A half-inch drill bit, available in many countries, many areas, is actually 12.7-millimeter diameter. This will give us a round hole, but it’s too large. So I’ve selected my 12-millimeter drill bit with the correct cutting head. I know it will give me a round hole, but it will only give me a round hole if it’s in good condition, no damage, and it’s straight. Otherwise, again, just to reinforce, we’ve got no pullout resistance.

So when we’re drilling our hole for placing the Coeur Pulse, a couple of things to be aware of. Firstly, we want to drill a nicely aligned hole, 90 degrees from our parent material. Make sure that the hanger plate of the Coeur Pulse sits flat against the rock, avoiding any other issues later in the installation. Whilst drilling, something which you’ll see later, but we need to be careful that we’re not moving or tilting the drill during the installation. Because this, again, is going to make a hole that’s too big. And the hole is too big, it doesn’t give us sufficient pullout resistance.

Before the installation of the Coeur Pulse, we need to check the condition of the anchor itself. A couple of things to look for. Firstly, we want to make sure that the wedge plates on either side are not fouled and that it runs smoothly.

 

Here we’ve got nice smooth action. There’s no damage to the cone. There’s no dirt inside there. So this one, I’m quite happy to use this one. In order to check the installation of the Coeur Pulse, you need to see a space between the yellow release plunger and the hanger. This space indicates the wedge plates are properly contacting the rock inside the hole. If that hole’s too big, then the yellow plunger will touch the hanger plate, and that means there’s no locking, and so the anchor isn’t strong.

Installation Release Space Lacking Contact

Locking the plunger avoids any accidental removal of the anchor, but it doesn’t affect its strength at all. If you have a need or desire to do a pullout test, an extraction test, to check that resistance strength, then that’s possible to do as well.

Finally, as with all anchors and more generally all devices used at height, it’s not recommended to rely on a single anchor point. So behind me here, you can see we have two Coeur Pulse anchors together. So as much as possible respecting the principle of redundancy, we always got two anchor points used in a complementary manner.

BUY PETZL COEUR PULSE ANCHOR SYSTEM HERE

Hidden Content

Peace on your Days

Lance

Looking for Rigging Gear?

Rescue Response GearShop our selection of rigging gear & equipment and save up to 20% off your total order!
  • Petzl
  • CMC Rescue
  • PMI
  • Sterling Rope
  • SMC
  • Skedco
  • Cascade Rescue
  • Rock Exotica
  • ISC
  • And more!

Free eBook

Learn how to master 10 major anchor systems with The Foundations of Rescue & Rigging Anchor Systems eBook.
The Foundations of Rescue & Rigging Anchor Systems eBook
Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on google
Google+
Share on email
Email

About The Author:

>