Today, we are at Deschutes Brewery in Bend Oregon. The scenario is an industrial rescue and access context and we are needing to perform rope access work over the railing on an industrial cat-walk. Anchor considerations are the prime focus at this point and truly, any “roped” activity. We have looked at top rope scenarios …
Industrial Rope Access Anchor Considerations Part 1 Read More »
In this system, a Mirrored Skate Block, there are two independent anchor straps from two separate parts of the vehicle. We have not equalized tension between the anchors to allow for proper readings from the ENforcer to record the peak force being exerted on the skate block. Moving past the ENforcer, is the V-Anchor system, …
Configuration of the Bottom Anchor for the Mirrored Skate Block Read More »
This Video Series is Sponsored by We are looking at a Mirrored Skate Block system. Communication workers and other tower “type” workers are the normal benefactors of this type of system. One large benefit of stake blocks is the lack of high tension on the system… however, it can be difficult to learn and execute.However, …
Rescue tripods “falling over” Natural, improvised, and purpose built high directionals are used to manage loads over edges and through openings. They can make otherwise impossible tasks possible. There are now many proprietary solutions with almost limitless configurations that are being used by rope technicians for access, standby rescue, technical rescue, and load management. High …
This Video Series is Sponsored by With light weight technical rescue there are many options for managing friction but not all are appropriate for remote, small team operations. It should be possible to simplify systems if we get back to basics and consider the true purpose of high directionals: namely to manage edge friction. Too …
Managing Edge Friction With An Artificial High Directional Read More »
The Arizona Vortex Workshop was hosted by Rescue Response Gear and The Rigging Lab. CMC Rescue taught the 3 day workshop and was well attended. Most of the evolutions included a Mirrored Systems using the CMC MPD and the progress capture on the main line, as well as the belay line. This type of set …
Arizona Vortex Workshop: Day 1/Video 1, Easel A-Frame Read More »
Part 1 of this High Definition video of two boys exploring a cave is sure to grab your attention. One boy falls into a cave. The Rescue Response Team responds and employs rope rescue gear and rescue techniques to successfully lower a medic to attend to the injured boy. They then raise the boy up …
The Arizona Vortex Multipod, named the “Multipod” because of its flexibility, has a two-piece break-apart head that can be rigged as a standard tripod, or in advanced applications, as an A-Frame, a sideways A-Frame, or a Gin Pole. The “easel” leg allows the tripod to be leaned to form an easel A-Frame, placing anchor points …
This sequence takes a page out of the nautical use of block and tackle hauling systems. By reeving double sheave pulley in the manner described here, the practitioner will acquire valuable skills in building a more efficient pulley system. The way we address knots, MAs (Mechanical Advantages), and Anchors in these videos are more general …
The Arizona Vortex Workshop was hosted by Rescue Response Gear and The Rigging Lab. CMC Rescue taught the 3 day workshop and was well attended. The Side A or SA Frame is probably the safest manner in which to set up an artificial high directional using the Arizona Vortex. Very accommodating to properly setting the …
Arizona Vortex SA (Sideways A) Frame with Compression Member Read More »
